Home > Groupwise Error > Groupwise Error 21 Unable To Decrypt Database

Groupwise Error 21 Unable To Decrypt Database

BellNovell Support Connection Volunteer SysopAuthor of Guinevere (http://www.openhandhome.com)PLEASE: Do not e-mail me privately unless specifically asked.I'm a volunteer, not a Novell employee!All opinions and advice provided are MINE alone and NOT See Analyzing and Fixing Library and Document Information in Databases in the GroupWise 8 Administration Guide. 66 Unable to correct document display name Source: GroupWise Check utility (GWCheck). Action: For additional information, look up the associated engine error code in Section I, GroupWise Engine Error Codes. 35 Memory allocation error Source: GroupWise Check utility (GWCheck). Password incorrect" is displayed. ⇒ Solution Check your name resolution (DNS or etc/hosts file). my review here

Edit the file /etc/opt/novell/sms/tsafs.conf, change the line "cachingmode=enable" to "cachingmode=disable" and apply the settings with rcnovell-smdrd restart. Action: Make sure you have write access to the database to repair. Possible causes One of the management services on the hypervisor is not or not correctly running. ⇒ Solution Log onto the ESXi server via ssh Restart the vpxa Service /etc/init.d/vpxa restart The GUI Server process is not running. ⇒ Solution Make sure that the computer is running.

For a better analysis of these problems, it would help to check the VMware vSphere farm connection using the command line. ⇒ Solution In the following command you have to replace Explanation: GWCheck cannot delete the specified storage area because BLOBs still exist in it. Possible causes Insufficient size of the registry/paged memory area. If an operating system returns an error, the error code and the operating system message are added to the SEP sesam error message.

Explanation: GWCheck cannot open the specified message database (msgnnn.db). From the list of services, right-click the Microsoft Exchange Information Store service (MSExchangeIS), and then click Restart. This is because SEP sesam creates empty VMDKs during the restore and uses the full disk size for thick provisioned disks. (For thin provisioned disks 0 bytes are reserved.) ⇒ Workaround GWCheck deleted the invalid index file. 50 Orphaned blob file Source: GroupWise Check utility (GWCheck).

tsatest --cluster -s CLUSTER_OBJECT_CLUSTERPOOL_SERVER Back up the specified volume, ’RESOURCE_ON_THE_CLUSTER_POOL’ on the NetWare virtual server node represented by CLUSTER_OBJECT_CLUSTERPOOL_SERVER. Backup of VMs with two VMDK files with the same file name does not work Problem If a virtual machine (named vmware) uses the VMDK files with the same name, e.g., Path backup on Windows is not working Problem SEP sesam Server failed to execute a path backup of a Windows client (however, a path backup without VSS is working). The client's VSS configuration is incorrect. ⇒ Solution Disable the antivirus software during backup.

See Analyzing and Fixing Library and Document Information in Databases in the GroupWise 8 Administration Guide. 64 Unable to complete verify during check error code Source: GroupWise Check utility (GWCheck). Transaction logs already in progress Problem This message appears in the SEP sesam: DB Module: [Archiving of transaction logs already in progress.] Possible causes The Lotus Notes API sends this message Action: Run GWCheck where adequate memory is available. 36 Message database not found Source: GroupWise Check utility (GWCheck). Action: Perform a structural analyze/fix on the library.

Explanation: Possible Cause: Action: 92 Error first tag not found Source: GroupWise Check utility (GWCheck). http://novell.support.groupwise.6x.clients.narkive.com/aol06ekS/archive-error Pattern: sbc_vadp -D -a username=,password=,url=https:///sdk,ignorecert=ignorecert "/VMware vSphere:" For example: sbc_vadp -D -a username=Administrator,password=mypassword,url=https://ws2008x64/sdk,ignorecert=ignorecert "/VMware vSphere:" It should then be listed in the configured VMware Data Center. Action: Perform a structural analyze/fix on the user database. Possible causes Older kernel versions (2.4) may use a different inode size than the one the file system's created through the Live-CD (which includes kernel 2.6).

Possible causes No TSA is loaded, or The wrong data mover was inserted. ⇒ Solution Restart the NetWare file system with unload TSAFS and load TSAFS. this page For details, see RMAN specific parameters. Diagnose and correct additional errors, and retry the operation.] DB Module: [DB-Library: File 'sesam_db_log' cannot be restored to 'c:/temp/sesam_log.ldf'. The system returned: (22) Invalid argument The remote host or network may be down.

See Rebuilding Domain or Post Office Databases in Databases in the GroupWise 8 Administration Guide. Action: Retry. Possible Cause: The post office database is damaged. get redirected here I have research Novell's knowledge baseand tried almost evryhing that pertains to this problem with no luck.

I have also recreated the archive on a different folder;copied the ngwguard file over and recreated the user database on thatarchive. Action: Make sure you typed the user name correctly in the User/Resource field in GWCheck. The Troubleshooting Guide describes problems as they may arise during the operation of your SEP sesam system, lists possible causes wherever possible and provides solutions to the problems.

Action: In ConsoleOne, rebuild the post office database.

The source NetWare server backs up all existing volumes respectively. "VOL-NAME:" backs up a specific volume when using --tsamode=netware. Possible Cause: The record is unavailable. The following error occurs: DB Module: [DB-Library: A file activation error occurred. Go through the Common problems you can solve by yourself checklist above.

Possible causes Occasionally, there are problems with special characters in passwords. See Maintaining User/Resource and Message Databases in Databases in the GroupWise 8 Administration Guide. Action: In ConsoleOne, rebuild the post office database. useful reference Sesam Multiplex Stream (SMS) is a service that receives the backup data from STPD and writes the data to the backup media.

Explanation: GWCheck encountered a BLOB file that did not have a trailer. Disaster recovery on Linux The recovered system does not boot Problem The system does not boot because /root/dev/console cannot be found. Action: Perform a structural analyze/fix on the library. Explanation: GWCheck cannot read the specified document type definition in the library database (dmsh.db) in the post office.

If the access test to the farm is successful, then the original password contained a character that caused the problem accessing the VMware farm. Explanation: Possible Cause: Action: Novell is now a part of Micro Focus Home Micro Focus Home Skip to Content Products Collaboration + Open Workgroup Suite GroupWise Micro Possible causes Most likely the file system options resize_inode,dir_index,large_file,ext_attr are causing the problem and making the system unbootable. ⇒ Solution Reboot from the Live-CD image, which includes the tool debugfs. Possible Cause: The library database is damaged.

Action: Check rights and available disk space. Your cache administrator is webmaster. Then restart the Microsoft Exchange Information Store service: Log in to the Exchange server and click Start. Use WITH MOVE to identify a valid location for the file.] Possible causes The wrong syntax was used in the file name, e.g., / instead of \. ⇒ Solution Enter the

Explanation: GWCheck cannot write a modified record back to the database. For example, if the Oracle backup file format is set to format 'full_%d_%I_%s_%p.bck', when the parameter %s (backup set number) is integrated into the filename, the backup set number increases with If any of the lines is incorrect, fix it and re-run the script `grub-install'. (hd0) /dev/hda (hd1) /dev/hdb You can ignore the error line 374: [: =: unary operator expected. Action: For additional information, look up the associated engine error code in Section I, GroupWise Engine Error Codes. 03 Record read error Source: GroupWise Check utility (GWCheck).

No, the userhas not been moved and the FID has not changed.Post by Tim Heywood NSC SYSOPIs the folder properly named? (ofXXXarc where XXX is the FID)Other than the archive, has after the restore finishes. Password incorrect then correct the name resolution.

© 2017 imagextension.com